background image

PS-3220

 Appendix A:  Compatibility

11

013-15949A

*The PS-3500 USB Bluetooth 4.0 Adapter, when connected to a USB port, allows up to three 
Bluetooth SMART devices, such as this PASCO wireless device, to connect to Windows 
computers, Chromebooks, and older Macintosh computers. 

Note: The PS-3500 USB Bluetooth 4,0 Adapter is the only adapter we can currently recommend. 
Many other Bluetooth 4.0 adapters are available but this adapter has a specific design that 
enables in-app pairing of Bluetooth SMART sensors. 

1

To check the Mac computer’s Bluetooth compatibility, do the following:

Click the 

 (Apple) Menu.

Select 

About This Mac

Click the 

More Info

... button.

Click the 

System Report

... button.

Select 

Bluetooth

 from the sidebar on the left, underneath 

Hardware

.

Scan down the list of information until you find “LMP Version”.

If your Mac is equipped with Bluetooth SMART, the LMP Version will show 

0x6

. (Anything lower than 

0x6

 

means an older version of Bluetooth. Your device will need the PS-3500 USB Bluetooth 4.0 Adapter.)

1

The Mac Mini and MacBook Air were updated with Bluetooth SMART support in 2011. The MacBook Pro was 

updated in 2012. The Mac Pro that debuted in December 2013 has Bluetooth SMART support.

Exception

: Before you upgrade to El Capitan (Mac OS X 10.11.x), if you have a Macintosh with LMP version “0x4” 

that requires the PS-3500 USB Bluetooth 4.0 Adapter, please contact PASCO Technical Support for further 
instructions.

PS-3500 USB 
Bluetooth 4.0 

Adapter

Summary of Contents for PS-3220
























Reviews: