![background image](http://html1.mh-extra.com/html/pasco/pasport-xplorer-ps-2000/pasport-xplorer-ps-2000_quick-reference_3932210027.webp)
23
012-07784C
Xplorer User’s Guide
®
6.
To accept your changes, press
. (To cancel the
editing, press
.
Manual Sampling Measurement Method
Sometimes, you want to take several measurements with a
sensor, but not at a regular rate. You might want to change
locations or experimental conditions between measure-
ments. An example of this is measuring the pH around dif-
ferent locations in a pond. Xplorer allows you to take a
measurement and store it in a data set only when you com-
mand. This measurement method is called “Manual Sam-
pling.”
Measuring with Manual Sampling
1.
Select the Manual Sam-
pling method. (See “Chang-
ing the Sampling Method”
on page 18.)
2.
Press
. (Xplorer
begins measuring and dis-
playing, but does not store a
measurement until you tell
it. A checkmark appears in
the upper-right corner of
Manual Sampling
Single Value
pH
10
Data Memory
1 set 3% full
pH