Xplorer User’s Guide
012-07784C
16
®
If you are using a display sub-mode (like data set review or
setting the date and time), pressing
cancels the edit-
ing changes or review mode and advances to the next main
display mode. (See the main display modes on page 13).
Changing the Sensor Measurement
Some sensors can simultaneously take more than one mea-
surement (i.e. The Motion Sensor measures position,
velocity, and acceleration.) When you plug in a sensor,
Xplorer automatically chooses a measurement to display.
To change the default mea-
surement:
1.
From the Sensor
Value display, press
or
to
cycle through all
available measure-
ments for the con-
nected sensor.
Xplorer remembers the
measurement you last
chose for a particular sen-
sor and displays it agains the next time you use that sensor.
For instructions on resetting the sensor memory, see page
32.
Position
---m
Velocity
---m/s
Acceleration
-----m/s/s
