850 Universal Interface
UI-5000
®
®
8
012-12355A
Refer to the
Help
menu in the menu bar and the online PASCO Capstone User’s Guide for more
information about the Workbook page and the palettes.
A. Setup
1.
In the
Tools
palette, click the
Hardware
Setup
button. The
Hardware Setup
panel opens with
a picture of the attached interface(s).
• If the interface automatically recognizes
the sensor* that you plugged into one of
its inputs, then the sensor’s icon will also
appear in the picture with the interface.
• At the bottom of the
Hardware Setup
panel is the name of the sensor. The gear
shaped button to the right of the name
opens the
Sensor Properties
dialog
window (not shown).
• Below the name of the sensor are the
Choose Interface
and
Add Sensor/Instrument
buttons.
2.
Click
Choose Interface
to open a dialog
window of interface choices. Click
Manual
to expand the list of choices. Each
connected interface is indicated by a check
mark.
Interface
Icon of attached sensor
Sensor name
Sensor
Properties
Icon of unattached
sensor
Hardware Setup panel
*In general, the interface automatically
recognizes all PASPORT sensors.
In this example, the Force Sensor PS-2104 is
connected to the first PASPORT input port.
NOTE: If a PASPORT sensor has been
selected for an input but the sensor is not yet
connected to the interface, the sensor’s icon
is slightly different.
(
) The exclamation mark triangle
indicates that the sensor is not connected or
detected.
Choose Interface… window