®
®
UI-5000
850 Universal Interface
012-12355A
15
• The
Bidirectional Sweep Type
starts at the
Initial Frequency
, moves to the
Final
Frequency
, and returns to the
Initial Frequency
– repeatedly – while the Signal Generator
output is on.
• NOTE: The I
nitial Frequency
can be lower or higher than the
Final Frequency
.
C. Signal Generator Controls: 850 Outputs 2 and 3
In the Capstone
Signal Generator
panel, click the
850 Output 2
drop down menu.
The
Signal Generator
850 Output 2
panel shows the
following controls:
Please see the online PASCO Capstone User’s Guide for detailed information about these
Signal Generator
functions.
•
Waveform
. Sine (default), Square, Triangle, Positive Ramp, Negative Ramp, and DC.
•
Sweep Type
: Off (default), Single, Repeat, Bidirectional
•
Frequency
: Default: 1000 Hz; Range: 0.001 to 500 kilohertz for AC waveforms
•
Amplitude
: Default: 1 V; Range: 0 to 10 V, depending on
Voltage Limit
.
•
Voltage Limit
: Default: 10 V. Range: 0 to 10 V.
•
On, Off, Auto:
On
starts the
Signal Generator
whether or not the Interface is recording
data;
Off
(default) stops the
Signal Generator
; and
Auto
starts and stops the
Signal
Generator
when the Interface starts and stops recording data.
NOTE: Output 2 and Output 3 differ from Output 1 in the
Frequency
and the
Amplitude
range.
Outputs 2 and 3 do not have the
Voltage Offset
and
Current Limit
controls. Also, the current
output is limited to 50 milliampere (mA). Otherwise, Output 2 and Output 3 operate the same
way as Output 1.
Cables
Output 2 and Output 3 have BNC ports. You can connect the BNC plug of the UI-5119 BNC-to-
Shrouded Banana Plug Cord or the UI-5219 BNC-to-Banana Plug Cord to either output port.
You can connect the banana plugs to the circuit or other device.
Please see the online PASCO Capstone User’s Guide for detailed information about the
Signal
Generator
panel and the features of the other Controls, Displays, and Tools.
Waveform
Amplitude
Sweep Type
Voltage Limit
Frequency
On, Off, Auto
850 Output 2 panel
