www.parweld.co.uk
7
MACHINE
OVER
VIEW
6.
Amperage Display.
Displays the welding amperage
during welding.
7.
Voltage Display. Displays
the welding voltage during
welding
8.
Fault indicator light,
illuminates if the machine is
over temperature or in a fault
condition
9.
Power Indicator shows
when the machine is turned on.
10. Process Sector MIG,
MMA or TIG.In MIG mode
controls are transferred to the
wire feeder, in TIG or MMA
all controls are on the power
source front panel.
11. Amperage control for
adjusting the Amperage in TIG
or MMA mode
12. Voltage control This
function controls the inductance
during MIG welding and the Arc
force during MMA welding.
13. Positive Output
Connection for MMA electrode
holder or TIG work return
lead. This is a 50mm twist lock
connection.
14. Negative output
connection used to connect
the work return lead for MIG or
MMA and the TIG torch power
cable. This is a 50mm twist lock
connection.
15. Voltage Trim, used to trim
the v/- during synergic
welding or to set the welding
voltage during manual MIG
welding
16. Wire speed/Amperage
control, used to set the wire
speed during Manual welding
or to trim the wire speed during
synergic welding.
4.1 Description of Controls Front
17. Memory button used to save MIG settings
18. Step back button to return to previous menu.
19. Main function adjustment button used to navigate through the
menus by rotating and pushing. Short press selects an option, long
press goes back to home menu
20. Euro torch connection for MIG torch
21.
Gas test button to check gas flow
22. Wire inching button for wire loading.
23. Water in out connections used for water cooled torch.
power Source
Wire Feeder
6
7
13
14
16
22
21
15
11
8
9
10
12
17
23
18
19
20