background image

 

 

MNL-0545B-01 

 
 
 
For more information about this or other products in the Parvus line of embedded systems solutions, call (801) 
483-1533 from 8:00AM to 5:00PM Mountain Time, E-mail us at  [email protected] or visit our web-site at: 

http://www.parvus.com

 

 
 
 

LIMITED WARRANTY 

 

Parvus Corporation warrants this product to be free of defects in materials and workmanship, and that the 
product meets or exceeds the current specifications published by Parvus. This Warranty is valid for a period of 
one (1) year from the date of purchase. Parvus reserves the right to repair or replace any Warranted products at 
its sole discretion. Any product returned to Parvus for repair or replacement under the provisions of this warranty 
must be accompanied by a valid Return Material Authorization (RMA) number issued by the Parvus Customer 
Service Department. 
 
Parvus Corporation makes no warranty not expressly set forth in this document. Parvus disclaims and excludes 
all implied warranties of merchantability and fitness for a particular purpose. The aggregate liability of Parvus 
arising from or relating to (regardless of the form of action or claim) is limited to the total of all payments made to 
purchase the product. Parvus shall not in any case be liable for any special, incidental, consequential, indirect or 
punitive damages, even if Parvus has been advised of the possibility of such damages. Parvus is not 
responsible for lost profits or revenue, loss of the use of software, loss of data, costs of recreating lost data, or 
the cost of any substitute equipment or program. 
 
This Warranty shall be governed by the laws of the United States of America and the State of Utah, and any 
claim brought under this Warranty may only be brought in state or federal court located in Salt Lake County, 
State of Utah, and purchaser hereby consents to personal jurisdiction in such courts. 
 
 
 
 
 
 
 

 

For further information contact: 
 

Parvus

®

 Corporation 

3222 S. Washington St. 
Salt Lake City, Utah, USA 84115 
(801) 483-1533, FAX (801) 483-1523 
Web-site: 

http://www.parvus.com

 

 

 

Summary of Contents for DURAVIS 3400



























Reviews: