Important Precautions
• Not intended for medical use.
• Electronics may be sensetive to static dissipation. Observe proper
precautions for handling.
• Do not “hot-swap” Dispensers while system is powered.
• Plug networking devices into Raspberry Pi only. Plugging them into RJ45
connectors on the Router Board will cause damage.
• It is not recommended to keep clear tubing immersed in liquid for ex-
tended periods of time.
• Beige tube (inside the Dispensers) life is approximated to be 500 hours
of use.
• If storing long term without use, remove beige tubing from dispensers to
extend tube life.
• Dispensers may need to be periodically re-calibrated as tubing wears.
• Please drink and use responsibly.
Specifications
Max Flow rate: 700mL / min
Motor Operating Voltage: 24V
Minimum Dispense Volume: 2mL
Repeatability: ±1mL
Dispenser Current Consumption at 24V: 350mA
Typical
, 500mA
max
System Current Consumption at 24V: 0.5A
Idle
, 3A A
ll dispensers on (B7)
0.5A
Idle
, 6A
All dispensers on (B15)
Max Cable Length to Router Board: 10ft
Bartendro
TM
www.partyrobotics.com
2
Congratulations!
You are one of the first owners of a new enabling piece of tech-
nology. These precision Bartendro
TM
Dispensers and electronics
are the same as what go into Bartendro
TM
cocktail bots. The appli-
cations don’t stop at cocktails though, people have been coming
up with lots of ideas from sno-cones to hydroponics. What will
you come up with? Share your projects at:
www.partyrobotics.com/community/sharing
B7 / B15 Kits
