www.partyrobotics.com
7
Bartendro
TM
B7 / B15 Kits
Getting under the hood:
There are several settings that aren’t exposed through the UI yet but
can be changed by modifying the config.py file on the Raspberry Pi.
Things like: use of liquid level sensors, display units, default size, taster
buttons, the requirement to be logged in to dispense, etc.
To modify these settings:
1.
Plug an ethernet cable from the RPI into a wired networking router.
We’ve dissabled the ability to do this wirelessly for security reasons.
2.
Use a terminal window on a Mac or Linux box, or use a program like
putty.exe in Windows to SSH into the bot. You may want to log into
your networking router to discover the RPI’s IP address.
Once connected,
login as: bartendro
password: hackme!
You can use vi to edit:
bartendro@bartendro ~ $ vi bartendro/ui/config.py
Save the file and power cycle for changes to take effect.v
See partyrobotics.com/docs for more detail.
Dispenser Mounting Interface
1.28
1.28
2.560
2.560
R1.50
1.57
.43
.50
Panel thickness should be 3/32” or less.
Use 4-40 or M3 screws.
All dimensions in inches.
