Partners SurfRAID TRITON Mini, User Manual

Page: 64 / 93

Configuring
3-30
3.7.3 Modify Volume Set
To modify a Volume Set from a RAID Set:
(1). Click on the Modify Volume Set link.
(2). Click on the Volume Set from the list that you wish to modify. Click on
the
Submit button.
The following screen appears.
Use this option to modify a Volume Set configuration. To modify Volume Set at-
tribute values from the RAID Set system function, move the cursor to the Volume
Set attribute menu and click on it. The Modify Value screen appears. Move the
cursor to an attribute item, and then click on the attribute to modify the value. After
you complete the modification, Click on
Confirm The Operation and click on
the Submit button to complete the action. User can modify all values except the
capacity.
3.7.3.1 Volume Expansion
Volume Capacity (Logical Volume Concatenation Plus Re-stripe)
Use the RAID Set expansion option to expand a RAID Set, when a disk is
added to your system. (refer to section 3.6.3)
The expand capacity function can be used to enlarge the Volume Set size or
create another Volume Set. The Modify Volume Set function supports the Vol-
ume Set expansion function. To expand a Volume Set capacity value from a
RAID Set system function, move the cursor to the Volume Set
Volume ca-
pacity item and enter the capacity size.
Click on Confirm The Operation and click on the Submit button to com-
plete the action. The Volume Set will start to expand.