Partners SurfRAID TRITON Mini, User Manual

Page: 34 / 93

Getting Started
2-11
2.8 Connecting to a PC or Terminal
The SurfRAID TRITON Mini is equipped with a serial monitor port located at
the rear of the system unit. This serves as an alternative display when ac-
cessing the setup utility.
Description
Data Carrier Detect (DCD)
Receive Data (RD)
Transmit Data (TD)
Data Teminal Ready (DTR)
Signal Ground (SG)
Data Set Ready (DSR)
Ready To Send (RTS)
Clear To Send (CTS)
Ring Indicator (RI)
Pin
1
2
3
4
5
6
7
8
9
Note:
Refer to Chapter 3 for instructions on accessing the setup utility
through a PC or terminal, as well as instructions on setting the
baud rate, stop bit, data bit and parity of your monitor or terminal.
The default setting of the monitor port is 115200 baud rate, non-
parity, 8 data bit and no flow control.
Monitor port