3. Hardware Installation
3.1 Basic Connections
Cameras
Connect the camera output to video input connector in real panel of the DVR.
The video input interface is standard BNC connector, 1Vp-p, 75 Ω.
Audio Connector
The audio input interface is standard RCA socket, 2Vp-p, 600 Ω.
The
audio input resistance is a little bit high; please use active sound collection device or
active microphone
. And the audio signal cable should keep away from the interference of
strong electromagnetism and electric field.
Monitor
Connect the main output connector to a monitor. Use BNC-to-RCA connector to work with
Audio/Video RCA cable.
Power
Use adapter come along with DVR, plug 12V
DC
output connector into the power socket.
Alarm Input/output
Please refer to
Chapter 5.6.2.
Ethernet
Connect the Ethernet connector to a standard twisted-pair Ethernet cable for remote access via
LAN or internet
USB 2.0
Support Mouse, USB Flash Drive, USB portable HDD, USB portable DVD Burner.
Only support FAT32 file system
.
3.2 Hard Disk and internal DVD Burner Install
HDD must be formatted by DVR system before it can be used to record.
PS. Do not format HDD by PC, it will cause incompatibility.
Please refer to Section 4.3 Format HDD to format the HDD.
There are usually power cable
and data cable
with the DVD
Burner you buy, connect to our DVR as follows(right):
16