8
Introduction to the 750w² Monitor
General
Display
The.750w².Monitor.is.designed.to.work.with.Partech’s.WaterWatch².(w²).sensors..It.combines.a.
clear.display.of.the.measured.parameter,.a.simple.user.interface,.with.good.flexibility.to.enable.
configuration.to.satisfy.the.users.needs.
The.750w².display.indicates.the.measured.value.with.large.numerals.with.an.additional.status.
line.that.shows.the.current.settings,.battery.status.and.any.faults.that.are.present..The.display.
has.a.backlight.to.enable.use.of.the.monitor.in.low.light.conditions.and.also.has.adjustable.
contrast.
The.measurement.title.and.units.can.all.be.user.set.to.suit.the.sensor.being.used.and.the.
application.being.monitored..
Display Value
Measurement
Units
Battery status
Status Bar
.
Keypad
The.7.key.tactile.membrane.keypad.is.used.for.all.configuration.and.operation.of.the.750w².
Monitor.
Sensors
The.750w².Monitor.can.currently.be.used.with.the.SoliTechw².IR.sensor.range
, OxyTechw
²
DO
sensor, and the Water
Techw²
Temperature sensor
.
Manual Conventions
This instruction manual describes the configuration and operation of the 750w² monitor and where
required includes some information regarding sensors. It is therefore very important that it is used in
conjunction with the relevant sensor quick start guides shipped with each product.
The manual has been written on the basis that the user has a basic knowledge of instrumentation and
an understanding of the type of measurement being made. Training in the use of the 750w² monitor can
be provided by Partech, please contact Partech for further information.
228538IM-Iss12
