Site
Management
This section explains the options under site management menu
for use with the
Suspended
Solids/Turbidity sensor only.
6RPH
sensors do not support sites.
If a sensor does not support sites, then the ‘Site’ option will
not
be visible within
the menu. In order to support the ‘Site’ option, both monitor and sensor require
the
necessary firmware versions. Please contact Partech for further information.
Each site stores its own calibration values, so changing
the
site will change the
calibration
settings
.
7KHILUVWQDPHLVWKHVLWHOLVWUHSUHVHQWVWKHGHIDXOWVLWHDQGFDQQRWEHGHOHWHG
$PD[LPXPRIVLWHVLVDYDLODEOH,IVLWHVDUHDOUHDG\LQXVHDQH[LVWLQJVLWHPXVWEHGHOHWHGWR
DGGDQHZVLWH
‘Loading Sites’ screen will be displayed followed
by a
request to select the site required. Press the OK
key to
select site.
Select Sites on the Main Menu. Press the OK key
to
select sub-menu
s section explains the options
under site management menu.
If a sensor does not support sites, then the ‘Site’
op
calibration.
The first name in the site list represents the
default site and cannot be deleted.
A maximum of 10 sites can be stored; therefore if
10 sites are already installed,
an existing site will require deletion before a new
site can be added.
If more than one site is active within a sensor, on
power on of the monitor, a
‘Loading Sites’ screen will be displayed followed
by a
request to select the site required. Press the
OK key to
select site.
Select Sites on the Main Menu. Press
the OK key to
select sub-menu
Select
Sites
on the main
menu. Press the
OK
key.
Select
Add Site
. Press
the
OK
key.
Use the arrows to name
the site. Press
OK
key
when complete.
Add a Site
Select
Sites
on the main
menu. Press the
OK
key.
Select
Delete
Site
.
Press the
OK
key.
Select the site to delete
Press the
OK
.
Delete
a Site
1
3
228538IM-Iss12
