Parsun F40 EFI, Maintenance Manual

Page: 90 / 119

85
1
．
Remove handle bracket, shift handle and steering handle.
2
．
Remove the throttle push-pull cable assembly.
3
．
Remove the cotter pin and remove the resistance adjustment knob.
4
．
Remove the throttle grip.
5
．
Remove throttle retaining plate and throttle lever.
6
．
Remove the engine emergency stop switch.
7
．
Check whether the shift linkage is bent and deformed. Replace it if necessary.
8
．
Check the steering handle for cracks or damage. Replace it if necessary.
9
．
Check the handle anti-wear ring and wave washer for cracks or damage. Replace it
if necessary.
10
．
Check whether the cable in the throttle push-pull cable assembly is worn or broken.
Replace it if necessary.
11
．
Check whether the throttle lever is bent or damaged. If yes, replace it.
12
．
Check the conductivity of engine emergency stop switch ; If it does not conform to
the standard, replace it.
Remove the locking plate: Conducting
Install locking plate: Non-conducting
Press the switch button: Conducting
Water unit and bracket