Bloodhound R19D Installation Instructions
Page 4 of 16
Step 2: Mount the router to the cover plate.
A.
Place the Cover Plate on the Antenna Plate as shown in Figure 4 to allow access to the Router Plate.
A.
Remove the film from the display covers and apply to the cover plate as shown in Figure 5.
B.
Install the R1900 router onto the Managed Accessory. Insert the four PTA0757 screws into the Router
and Accessory and slide the Router into the Router Module, as shown in Figure 6.
C.
Mount the router using the four PTA0140 Washers, four PTA0844 Lock Washers, and four PTA0408
Nuts provided in the kit, as shown in Figure 7.
D.
Ensure the router orientation is correct as shown in the images below. The router display should be
visible through the slot(s) in the cover plate.
Figure 4: Place the Cover Plate on the Antenna Plate.
Figure 5: Install the Display Covers on the Cover Plate.
