Parry
-British Built for Purpose
IN173-4
9
Conversion Instructions
This conversion must be carried out by a competent qualified person.
Disconnect machine from gas supply
Remove cooking grids and burner covers
Undo the three wing nuts on the rail that is fixing the burners in position. Once the
rail is removed the burners can be lifted straight out.
Remove the back panel by removing six screws.
Unscrew the four burner injectors and replace with the appropriate injectors for the
gas type that is being changed to (see table below)
Reassemble the burners and fix the rail down with the wing nuts.
Undo the pilot nut, by turning anticlockwise.
Replace the pilot injector with the appropriate pilot injector for the gas type being
changed to from the conversion kit provided
Reassemble the pipe onto the pilot and tighten the nut.
Reassemble the back panel, fixing in place with the six screws.
Pull off the black control knobs
Undo the three screws at the bottom of the fascia and remove.
Alter the low rate adjuster screw on both valves accordingly
Reseal the adjuster screws with paint.
Replace the fascia panel and attach control knobs.
Test for soundness
When conversion is complete affix new data label and the appropriate gas label supplied
with the conversion kit, detailing type of gas and pressure etc.
Model
Gas Input
Injector Code
PGC6P
Propane G31 @ 37 mbar
14.8” W.G.
INJECT119
PGC6
Natural Gas G20 @ 20 mbar
8” W.G.
INJECT193
Summary of Contents for PGC6
Page 1: ...Instruction Manual Gas Chargrill PGC6 PGC6P...
Page 2: ......
