Parrot FC7100, Product Data Sheet

Page: 30 / 39

•
CAM_5 :
Config #α : 1 x CAM 8 bits (720p)
Config #β : 1 x SDIO interface (SD XC compatible)
CAM
In summary, all options are below
•
LCD 24 bits (1080p) + 3xCAM 8 bits (720p)
•
LCD 24 bits (1080p) + LCD 8 bits (720p) + 2xCAM 8 bits (720p)
•
LCD 24 bits (1080p) + CAM 16 bits (1080p) +
•
LCD 16 bits (1080p) + 4 x CAM 8 bits (720p)
•
LCD 16 bits (1080p) + CAM 16 bits (1080p) + 2 x CAM 8 bits (720p)
•
LCD 16 bits (1080p) + LCD 8 bits (720p) + 3 x CAM 8 bits (720p)
•
LCD 8 bits (720p) + 5 x CAM 8 bits (720p)
•
LCD 8 bits (720p) + C
•
LCD 8 bits (720p) + LCD 8 bits (720p) + 4 x CAM8 bits (720p)
•
6 x CAM 8 bits (720p)
•
CAM 16 bits (1080p) + 4 x CAM 8 bits (720p)
5.3.12 IO configuration
The GPIO interface provides programmable general input/output conf
available on any edge or polarity event. Each source can be selected among all the GPIOs.
Each pads have programmable :
•
Drive strength : can be programmed from 2.93mA to 17.24mA during pull
16.17mA during pull down.
•
Slew Rate: The slew rate is defined as the maximum rate of change of the out
•
Keeper: enable or disable keeper mode. Holds last value on a tri
•
Pull-down or Pull-up: active an internal pull
Parameter
Pull Up impedance
Pull Down impedance
•
Schmitt trigger: enable or disable Schmitt Trigger.
Confidential Information
: 1 x CAM 8 bits (720p)
: 1 x SDIO interface (SD XC compatible)
ITU 656
8 bits
CAM_5
8 bits
Config #α Config #β
s are below :
LCD 24 bits (1080p) + 3xCAM 8 bits (720p)
LCD 24 bits (1080p) + LCD 8 bits (720p) + 2xCAM 8 bits (720p)
LCD 24 bits (1080p) + CAM 16 bits (1080p) + CAM 8 bits (720p)
LCD 16 bits (1080p) + 4 x CAM 8 bits (720p)
LCD 16 bits (1080p) + CAM 16 bits (1080p) + 2 x CAM 8 bits (720p)
LCD 16 bits (1080p) + LCD 8 bits (720p) + 3 x CAM 8 bits (720p)
LCD 8 bits (720p) + 5 x CAM 8 bits (720p)
LCD 8 bits (720p) + CAM 16 bits (1080p) + 3 x CAM 8 bits (720p)
LCD 8 bits (720p) + LCD 8 bits (720p) + 4 x CAM8 bits (720p)
6 x CAM 8 bits (720p)
CAM 16 bits (1080p) + 4 x CAM 8 bits (720p)
provides programmable general input/output configurable. Interrupt lines
available on any edge or polarity event. Each source can be selected among all the GPIOs.
: can be programmed from 2.93mA to 17.24mA during pull
.
: The slew rate is defined as the maximum rate of change of the out
: enable or disable keeper mode. Holds last value on a tri-state bus.
: active an internal pull-down or pull-up.
Min. Typ Max.
27
30 34
27
30 34
: enable or disable Schmitt Trigger.
30/39
Ref: OEM-2012-149
igurable. Interrupt lines
available on any edge or polarity event. Each source can be selected among all the GPIOs.
: can be programmed from 2.93mA to 17.24mA during pull-up and
2.68mA to
: The slew rate is defined as the maximum rate of change of the output voltage.
state bus.
Unit
kOhm
KOhm