ENGLISH
12
MENU
The Main Menu consists of the following 4 sections:
"Phone Book", "Parameters", "Keywords" and " Reset memory". You can access the menu items by selecting the desired
menu item using the key and confirm by pressing "Yes".
In the phone Menu go to “Extras” for T39/T39m/R520m, or “Connect” for T68/T68m/T68i/T610/T616/T618/Z600/Z608.
Press Until “Accessories” and press on «Yes».
"Parrot Menu" is displayed, click "Yes"; menu headings are displayed.
Phone book
:
•
List
: Displays the list of names in your phone book. Names with associated active voice tags are preceded by an asterisk (*).
•
To learn or relearn
a name, highlight the desired name and press "Yes" to confirm.
•
Search
: allows you to look for a name by its first letter(s). To do this, type a letter and confirm by pressing "Yes".
Parameters
:
•
Volume :
This function also adjusts the volume of the DriveBlue. Click Yes and adjust using or . Press "Yes" to
confirm.
•
Auto answer :
This function enables or disables automatic answering of incoming calls. Click “Yes”, and then
select "Enable" or "Disable".
•
User :
When several telephones are connected to the DriveBlue, this function identifies the telephone with
priority.
The phone with the highest priority is the first phone to which the kit tries to connect to.
o
Click Yes, "Main user?" is displayed, confirm.
•
Caller ID :
This function lets you know the identity of the caller. With this function enabled, when you receive a
call, the name of the person calling you is pronounced if it is already stored in your phone book and corresponding
voice tag is assigned. Click Yes and select "Enable" or "Disable".
•
Multi-tel :
This function is available for Ericsson and Sony Ericsson phones equipped only with the "Headset"
profile. The affected phones are Ericsson R520, T39, T68m and the first Sony Ericsson T68i phones (software
version lower than R2E). This option allows the simultaneous use of these different phones during a single session of
use. The first phone getting connected to the DriveBlue is the main phone for the use session of the car-kit (until
extinction). If the option "Multi-Tel" is activated for this phone, the DriveBlue will accept incoming calls from the other
phones if they were previously paired with the DriveBlue.
ATTENTION : The "Multi-Tel" function is now compatible with the T68i, T610, T616, T618, Z600 and Z608 (with
specific software versions - see “Phone configuration” page 11). This function is available when the
"Powersave" mode is activated in the phone, i.e.
”
Headset
”
profile mode (see “Phone configuration” page 11).
Once this mode activated, the DriveBlue has to identify every phone in this new mode. It should be necessary
to connect separately each phone with the DriveBlue and restarting it between each identification.
Voice recognition:
•
Tel N°:
Keywords for calling V-Cards (“Home”, “Work” and “Cellular”) can be accessed by clicking "Yes", Tel.
N°. The voice recognition learning sequence is exactly the same as the one for the names.
•
Keywords :
Key words are “Phone” and “Hang Up”. You need to record your own keywords for use with
“Wordspotting” option.
•
Wordspotting :
If activated, enables use of keywords to make a call and to hang up.
- Activated: use keywords or buttons
- Deactivated: use buttons only
•
Pers. Dic :
The keywords are pre-recorded in the car kit for French language only (the language is determined
by the language used by the menus of the phone). You need to activate this option if you want to use your own
recorded keywords.
Erasing the Memory
:
Click "Yes", and "Clear memory?" is displayed.
Confirm by pressing "Yes" and "Memory erasing in progress. Please wait!" - is announced. To cancel, press "No".
It is possible to erase the memory and reset the system without using the Parrot menu. To do this, hold the red and the
green buttons together.
For more information, refer to the instructions of your Ericsson or SonyEricsson user’s guide.
ERICSSON & SONY ERICSSON
