9
Installation
that the orange wire is not connected to the constant +12V supply, as you could run
down the vehicle’s battery.
Note:
In order to check the wiring, connect the screen before placing it on the dashboard.
Refer to the Checking the wiring section for more information.
On some vehicles, there is no ignition +12V on the vehicle’s connectors. You must
therefore connect the orange power supply wire to the fuse box or another ignition
power source.
Connecting the mute cable
The mute function is used to cut the sound of your car stereo to enable the sound of
the Parrot ASTEROID Tablet (music, phone calls etc.). Mute in 1, mute in 2 and mute
in 3 are only suggested mute locations : the choice of the mute-in jack depends on your
car stereo’s configuration. Test and verify the mute on the vehicle then connect the
free yellow wire on the ISO cable to the audio system’s corresponding mute-in jack
(connection 5).
Connecting the parking brake cable
The parking brake cable allows you to use the video function of the Parrot ASTEROID
Tablet when the parking brake is engaged. If this cable is not connected to the vehicle
parking brake signal cable, the video function will never be available.
1. Connect the provided extension lead to the Parrot ASTEROID Tablet green
parking brake cable.
2. Locate the parking brake signal cable of your vehicle.
3. Install the Parrot ASTEROID Tablet parking brake extension lead and the parking
brake signal cable on the provided crimp connector.
4. Fold the crimp connector twice.
