© 2014 - 2024 Parktron Technology Ltd.
© 2014 - 2024 Parktron Technology Ltd.
18
19
10) Service items
(1)
One year
'
s free servicing is supplied
(
not including the arm
);
(2)
Lifetime charged servicing is offered
.
(3)
Technology servicing is supplied
.
The following situations are charged for servicing
(
or changing
):
(1)
Broken by wrong installation
.
(2)
Broken by improper voltage
.
(3)
The surfaces of the system destroyed by wrong installation or use
.
(4)
Broken by natural disaster
.
(5)
Overdue
.
(6)
Servicing items out of our promises
.
The upgrade and improvement of the product won
'
t be
Left side
2) Installation of the infrared photocell
Photo test
(
Fig
.
13
)
Emitter
Top
Right side
Bottom
notified if there is any
.
The explaining authority of this product instruction and
service article belongs to the production factory
.
Appendix
Receiver
1) Remote control code instruction and figure
If the remote control code does not match the one on the remote
controller and the infrared photo cell
,
please adjust it as below
:
There is a control code table pasted on the back of the remote
controller and the transformer of the radio controller for coding
.
Open the controller cover
,
take out the battery
.
There is a code
pad on the PCB
,
the direction is from right to left
,
and the first code
is on the right
.
"
0
"
stands for linking the middle and the top
, "
1
"
stands for linking
the middle and the bottom
, "
X
"
stands for empty
.
The following
Receiver
3) Adjustment of the limit switch
Emitter
code is
:
01XX1X0X
(1)
The blue laser obstacle on the spindle near the clutch is the laser
obstacle to stop the boom after it stands straight
:
When the boom is at the falling limit position
,
adjust this laser to
make it point downwards and form an angle (
≦
90°) with the arm
.
When the laser obstacle moves into the slot and the green light is
on
,
the rising limit will work and the boom will stand straight
.
Check
the vertical angle between the boom and the horizontal position and
adjust.
