Parkside PWSA 20-Li E4, Translation Of The Original Instructions

Page: 7 / 310

PWSA 20-Li E4 ■ 2
│
GB
│
IE
CORDLESS ANGLE GRINDER
PWSA 20-Li E4
Introduction
Congratulations on the purchase of your new
appliance. You have chosen a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all operating and
safety instructions. Use the product only as
described and for the range of applications speci-
fi ed. Please also pass these operating instructions
on to any future owner.
Intended use
The appliance is intended for cutting, rough cutting
and brushing metal, concrete or tiles without the
use of water. Any other usage or modifi cation of
the appliance is deemed to be improper and carries
a signifi cant risk of accidents. The manufacturer
accepts no responsibility for damage(s) resulting
from improper usage. The appliance is not intended
for commercial use.
Explanation of the symbols used
Before using the appliance for the fi rst
time, read the original operating
instructions and safety instructions.
The use of damaged cutting or
polishing discs is dangerous and can
lead to serious injuries!
Diameter of the disc
Cordless angle grinder
Wear protective goggles!
Wear ear muff s!
Wear safety shoes!
Wear protective gloves!
Wear a dust mask!
Not approved for wet grinding
Not approved for side grinding
Suitable for grinding metal
Always use the power tool with both
hands
Features
ON/OFF switch
Release button for the battery pack
Battery pack*
Battery charge level button
Battery display LED
Adjusting wheel for speed pre-selection
Additional handle
Blade guard
8a
Protective cover
Spindle locking button
Screw thread (3 x) for the additional handle
Mounting ring
Screws
Blade guard fi xture
High-speed charger (see fi g. A)*
Red charge control LED (see fi g. A)
Green charge control LED (see fi g. A)
Attachment spindle (see fi g. C)
Attachment fl ange (see fi g. C)
Clamping nut (see fi g. C)