PTS 500 B2
■
28
│
GB
│
IE
HW circular saw blade Z85 / 30:
Description: ø 85 mm, 30 HW teeth Suitability:
soft wood, hard wood, any kind of panel, plastics
Diamond-coated cutting saw blade
Z85VR:
Description: ø 85 mm, full edge disc Suitability:
ceramics, plastics
HS circular saw blade Z85 / 36:
Description: ø 85 mm, 36 teeth – cross-cut left
/ right Suitability: soft wood, soft metal such as
aluminium, copper, plastics
Markings for cut length
♦
Use the markings for the max. cut length , to
check where your cut starts and ends.
Markings for cutting line
The viewing window for the cutting line helps you
accurately guide machine along the cutting line on
the workpiece.
♦
For a true to size cut, place the machine onto
the workpiece so that the cut marking appears
in the viewing window for the cutting line .
Connecting the sawdust extraction
device
♦
Push the suction hose onto the dust extractor
connector .
♦
Attach an approved dust and sawdust extractor
to the suction hose .
Changing the saw blade
1. Actuate the spindle lock and use the Hex
key to loosen the clamping screw (turn
clockwise to open). Now remove the clamping
screw and washer and the clamping flange
(see also Fig. B).
2. Set the cutting depth to the maximum position.
3. Swivel the base plate up.
4. Remove the saw blade .
5. Fit the saw blade in the reverse order as de-
scribed.
6. Actuate the spindle lock (until it engages)
and use the Hex key to tighten the clamping
screw .
■
The arrow on the saw blade must correspond to
the arrow showing the direction of rotation
(running direction shown on the device).
Switching the laser on and off
Switching on:
♦
Slide the ON/OFF switch laser to the “ON”
position.
Switching off:
♦
Slide the ON/OFF switch laser to the “OFF”
position.
NOTE
►
If the batteries are spent, replace them with
two new 1.5 V alkaline button cells (type
AG 13/LR 44, e.g. GPA 76) .
Cleaning and maintenance
WARNING! RISK OF INJURY! Always
remove the power plug from the
mains power socket before carrying
out any work on the appliance.
■
Always clean the appliance after finishing work.
■
For cleaning the housing use a cloth, under no
circumstances should you use petrol, solvents or
cleaning agents.
Disposal
The packaging is made from environmen-
tally friendly material and can be
disposed off at your local recycling plant.
Do not dispose of power tools in
your normal household waste!
European Directive 2012/19/EU requires that
used power tools be collected separately and recy-
cled in an environmentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
Summary of Contents for PTS 500 B2
Page 3: ...A B 11a ...
Page 65: ...PTS 500 B2 62 NL BE ...
