PSVH 56 A1
■
18
│
GB
│
IE
Working on pre-assembled wooden workpieces
(Fig. G)
♦
Set the drilling depth (see figures A to C).
♦
Push the limit stop on the drilling jig upwards.
♦
Fix the drilling jig and the wooden workpiece firmly in place with
the clamp .
♦
Select the appropriate woodscrews with the help of the table.
NOTE
►
The woodscrews selected must be 5 mm longer since the width
of the inserted limit stop (5 mm) must be added to the length.
♦
Screw the selected woodscrews in using the bit attachment
after drilling.
♦
Fill the drill holes with glue and push the screw head covers into
the holes.
Cleaning
WARNING
►
Before cleaning, always remove the step drill or the bit attach-
ment from the drill or cordless screwdriver.
►
Do not use aggressive or abrasive cleaning agents, as these can
damage the surfaces of the product.
♦
Use a soft, dry brush to remove drilling dust from the product.
♦
You can also clean the product using a dry cloth.