PSVH 56 A1
GB
│
IE
│
15
■
Use
NOTE
►
In addition to the items supplied, you will require a drill or a cordless
screwdriver and an additional clamp in order to use the product.
Measuring wood thickness (Fig. A)
♦
Press the limit stop on the drilling jig downwards.
♦
Place the drilling jig against the wooden workpiece and read off
the wood thickness.
Setting the wood thickness (Fig. B)
♦
Set the measured wood thickness on the drilling jig using the
following table.
Wood thickness
Setting
12–18 mm
12
19–26 mm
19
27–37 mm
27
≥ 38 mm
38
♦
Hold down the knob and push the drilling jig until the required
setting is reached.
♦
Release the knob once the drilling jig is engaged.