![background image](http://html1.mh-extra.com/html/parkside/psvh-56-a1/psvh-56-a1_operating-instructions-manual_4044503019.webp)
PSVH 56 A1
■
16
│
GB
│
IE
Setting the drilling depth (Fig. C)
♦
Push the drilling jig limit stop upwards and place the drilling jig
on a flat surface.
♦
Place the step drill right up against the side of the drilling jig with
the step drill symbol. The tip of the step drill should contact the tip of
the step drill symbol.
♦
Push the depth stop onto the step drill as far as the edge of the
drilling jig .
♦
Screw the depth stop tight using the hex key .
Drilling holes (Fig. D)
NOTE
►
To provide a stable hold, drill two woodscrews into each joint.
♦
Clamp the step drill (with the depth stop screwed on) into a drill
or a cordless screwdriver.
♦
Press the limit stop on the drilling jig downwards.
♦
Place the limit stop on the drilling jig against the wooden work-
piece.
♦
Fix the drilling jig and the wooden workpiece firmly in place with
the clamp .
♦
Drill into the wooden workpiece as far as the depth stop .