9
GB/IE/NI
… / Cleaning and Maintenance / Environmental instructions / Troubleshooting
Table for setting the darkening shades
Arc current (ampere)
1.5 6 10 15 30 40 60 70 100 125 150 175 200 225 250 300 350 400 450 500 600
SMAW
8
9
10
11
12
13
14
MAG
8
9
10
11
12
13
14
TIG /
GTAW
8
9
10
11
12
13
MIG
(heavy)
9
10
11
12
13
14
MIG
(light)
10
11
12
13
14
PAC
9
10 11
12
13
PAW
4
5
6
7
8
9
10
11
12
SMAW:
welding with coated electrodes
MIG (heavy): MIG welding heavy metals
MIG (light):
MIG welding light metals and alloys
TIG / GTAW: welding with inert gases
MAG:
welding with metal active gas
PAC:
plasma cutting
PAW:
plasma welding
Cleaning and Maintenance
Do not use any harsh cleaning agents to clean
the helmet casing
2
.
Never bring the UV filter
8
into contact with water.
Clean the product with a soft, dry cloth, with a
cloth dampened with pure alcohol or with a
cloth dampened with disinfectant.
Environmental instructions
and disposal information
Don‘t waste, recycle!
The device, accessories and packaging
should be recycled in an environmen-
tally friendly manner.
Do not throw the auto-darkening welding helmet
into household rubbish, fire or water. If possible,
non-operational equipment should be recycled.
Contact your local retailer for information.
Troubleshooting
Error
Cause
Solution
The filter does not darken in a
normal way or flickers.
The protector does not darken in
a normal way or flickers.
Clean the protector or replace it.
The arc sensor is not clear.
Clean the arc sensor's surface.
The welding current is too low.
Set the sensitivity to the maximum
degree.
Safety instructions / Initial use
