Parkside PPS 40 A1, Operation And Safety Notes

Page: 20 / 125

20 GB
• Maintenance
PLEASE NOTE!
f
The plasma cutter must be regularly
maintained for perfect function and
comply with the safety requirements.
Improper and wrong operation may
cause failures and damage to the
device.
„
Switch off the main power supply and
the main switch of the device prior to
carrying out maintenance or repair work
on the plasma cutter.
„
Regularly clean the outside of the plasma
cutter. Use compressed air, cotton waste
or a brush to remove dirt and dust.
• Storage
If you will not be using the device for
a while, protect it from dust by storing
it in a clean and dry place.
• Warranty and service
information
Warranty from Creative
Marketing & Consulting GmbH
We give you a warranty on this device of
3 years from the date of purchase. In the
event of product defects, you have legal
rights against the retailer of this product.
Your statutory rights are not affected in any
way by our warranty conditions, which are
described below.
• Warranty conditions
The warranty period begins on the date of
purchase. Please retain the original sales
receipt. This document is required as your
proof of purchase.
Should this product show any defect in
materials or manufacture within 3 years
from the date of purchase, we will repair
or replace it – at our discretion – free of
charge. This warranty service requires that
you retain proof of purchase (sales receipt)
for the defective device for the three year
period and that you briefly explain in writing
what the fault entails and when it occurred.
If the defect is covered by our warranty,
we will repair and return your product
or send you a replacement. The original
warranty period is not extended when
a device is repair or replaced.
• Extent of warranty
This device has been manufactured
according to strict quality guidelines and
carefully inspected before delivery.
The warranty applies to material and
manufacturing defects only. This warranty
does not cover product parts that are subject
to normal wear and tear and can therefore
be regarded as consumables, nor does
it cover damage to fragile parts such as
switches, rechargeable batteries or parts
made from glass.
This warranty is voided if the product
becomes damaged or is improperly used or
maintained. For proper use of the product,
all of the instructions given in the operating
Maintenance and care / Warranty and service information