Parkside PMGS 12 D3, Translation Of The Original Instructions

Page: 14 / 32

PMGS 12 D3
GB
│
IE
│
NI
│ 11 ■
Tips and tricks
■ If you exert too much pressure, the fitted tool can
break and/or the workpiece could be damaged.
You will achieve optimum working results by
moving the tool over the workpiece at a steady
speed and while exerting light pressure.
■ When carrying out cutting work, hold the appli-
ance firmly with both hands.
■ Observe the data and the information in the
table to prevent the end of the spindle from
touching the perforated base of the grinding
tool.
Maintenance and cleaning
The appliance is maintenance-free.
■ Remove all dirt from the appliance. Use a dry
cloth to do this.
WARNING!
■ Have the power tool repaired by the Ser-
vice centre or a qualified electrician and
only using genuine replacement parts.
This
will ensure that the safety of the appliance is
maintained.
WARNING!
■ Always ensure that the power plug or
the mains cable is replaced only by the
manufacturer of the appliance or by an
approved customer service provider.
This
will ensure that the safety of the appliance is
maintained.
NOTE
► Replacement parts not listed (such as carbon
brushes, switches and mains adapter) can be
ordered via our service hotline.
Disposal
The packaging is made from environ-
mentally friendly material and can
be disposed of at your local recycling
plant.
Do not dispose of power tools in
your normal household waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Please consult your local authorities regarding
suitable disposal of worn out power tools.
Batteries should not be disposed of
with normal household waste.
Consumers are legally obliged to dispose of used
batteries at a collection point in their town/district
or at a retail store. This obligation is intended to
ensure that batteries are disposed of in an environ-
mentally responsible manner. Dispose of batteries
only when they are fully discharged.