Parkside PISG 120 B3, Operation And Safety Notes

Page: 16 / 117

16 GB
must adhere to the Class A limit
values.
WARNING NOTICE:
Class A
devices are intended for use in
an industrial environment. Due to
the power-related as well as the
radiated interference variables,
difficulties might arise in ensuring
electromagnetic compatibility in
other environments.
Even if the device complies
with the emission limit values in
accordance with the standard,
such devices can still cause
electromagnetic interference in
sensitive systems and devices.
The user is responsible for faults
caused by the arc while working,
and the user must take suitable
protective measures. In doing so,
the operator must consider the
following:
– network, control, signal and
telecommunication lines
– computers and other micropro-
cessor-controlled devices
– TVs, radios and other playback
devices
– electronic and electrical safety
equipment
– people with cardiac pacemak-
ers or hearing aids
– measurement and calibration
devices
– interference immunity of other
equipment nearby
– the time of day at which the
work is being done. The follow-
ing is recommended to reduce
possible interference radiation:
– equip the mains connection
with a mains filter
– service the device regularly and
keep it in good condition
– welding cables should be
completely uncoiled and run as
close to parallel with the floor
as possible
– if possible, devices and systems
at risk from interference radi-
ation should be removed from
the work area or shielded.
The product is intended solely for
professional use.
z
Before use
Take the device and accessories out
of the packaging and check them for
damage (e.g. transport damage).
„
Fix the carrying strap
1
onto the
device (see Fig. C1 – C4).
z
Fit welding mask
„
Fit the handle
8
onto the welding
mask
7
, as shown in Fig. A.
„
Fit the protective glass
11
on to the
welding mask
7
, as shown in Fig. A.
„
The protective glass
11
must be
pushed in from the top.
Safety instructions / Before use / Fit welding mask