Parkside PDWE 8 A2, Instructions Manual

Page: 7 / 81

7 GB/CY
Introduction / Safety notes
Reduce the residual risk by carefully using
the device as intended and observing all
instruction.
z
Parts description
After unpacking the product, please check
that the device is in perfect condition. Do not
use the product if it is defective.
1 Filter unit
2
Barbed fitting
3 Compressed air controller
4
Compressed air pressure gauge
5 Wall bracket
6 Oil refilling inlet
7
Oil gauge plug
8 Quick coupling
9
Oil mister unit
10 Release knob
11 Container for pneumatic oil, oil container
12 Drain valve
13 Condensate collection container
14
Filter insert
z
Technical specifications
Max. working pressure: 8 bar
Oil: Suitable compressor
oil
z
Package contents
1 pneumatic air maintenance unit including
connections
z
Safety notes
„
Please read the operating
instructions with care and
observe the notes described.
Familiarise yourself with the
device, its proper use and the
safety notes based on these
operating instructions.
„
The rating plate container all
technical data of this pneumat-
ic maintenance unit; please
learn about the technical fea-
tures of this device.
„
This device can be used by
children 16 years and old-
er and also by persons with
reduced physical, sensory or
mental capacities or a lack of
experience and knowledge
if they are supervised or they
have been instructed with
regard to the safe use of the
device and they understand
the dangers it presents. Do
not allow children to play with
the product. Cleaning and
user maintenance must not be
performed by children without
supervision.
„
In connection with a com-
pressor, the maintenance unit
serves maintenance and care
(e.g. filtering, oiling and regu-
lation) of your pneumatic tools.
The maintenance unit must
only be used with a pneumatic
compressor. When using the
device, observe the maximum
compressed air values of the
connected tools and check