![background image](http://html2.mh-extra.com/html/parkside/pdss-310-a1/pdss-310-a1_original-operating-instructions_3855155007.webp)
1. Introduction
Important.
When using the equipment, a few safety
precautions must be observed to avoid injuries
and damage. Please read the complete
operating instructions and safety information
with due care. Keep these operating
instructions in a safe place so that the
information is available at all times. If you give
the equipment to any other person, hand over
these operating instructions and the safety
information as well. We cannot accept any
liability for damage or accidents which arise
due to a failure to follow these instructions and
the safety information.
2. Safety information
CAUTION
Read all the safety regulations and
instructions.
Any errors made in following the
safety information and instructions set out
below may result in an electric shock, fire
and/or serious injury.
Keep all safety information and instructions
in a safe place for future use.
Protect yourself and your environment from
accidents by taking the appropriate
precautionary measures.
■
Do not use the hammer screwdriver for
purposes other than that for which it is
designed.
■
Keep children away from air tools.
■
The equipment may only be operated by
persons who are rested and concentrated.
■
Connect the compressed air supply only
over a quick fastener coupling.
■
The working pressure must be set on the
pressure reducer.
■
Do not use oxygen or combustible gases as
power source. Danger of fire and explosion.
■
Do not exceed the maximum permissible
operating pressure.
■
Only operate the equipment with the
pressure required for the relevant operation.
This will help to prevent an unnecessarily
high noise level, increased wear and
resulting faults.
■
Beware of whipping compressed air hoses.
When releasing the hose coupling, be sure
to hold the hose coupling piece with your
hand to protect yourself against injury from
the rebounding hose.
■
Wear the necessary protective clothing, in
particular impact-proof safety goggles, ear
muffs and safety gloves, when working with
the hammer screwdriver.
■
There is a risk of injury from splinters which
may be catapulted away at high speed if the
installed tool (connector) breaks.
■
Make sure that the workpiece is fixed
securely.
■
Wear suitable clothes. Never wear loose
fitting clothes or jewelry. Keep hair, clothing
and gloves away from moving parts. Loose-
fitting clothing and gloves, jewelry or long
hair may be caught by moving parts and
cause serious injury.
■
Keep your hands away from rotating parts.
Never hold the drive, the tool attachment or
the extension.
■
Rotating parts may catch on slightly
rubberized or metal-reinforced gloves.
■
Never wear frayed gloves
■
Using this equipment can cause bruises,
grazes, cuts and burns. Wear suitable
gloves.
■
The user must be physically capable of
operating the equipment.
■
Unexpected movements of the hammer
screwdriver caused by feedback forces or
damage of the installed tools may cause
injuries.
■
An unexpected movement of the installed
tool can cause a dangerous situation.
■
Avoid abnormal working postures. Ensure
that you are standing securely and always
keep your balance to be able to react to the
normal or unexpected movements of the
hammer screwdriver due to feedback
forces.
■
Let go of the trigger lever (2) if the air supply
is interrupted.
■
Never operate the equipment in areas with
GB/
IE
7
Anleitung_LB3_4138942:_ 12.04.2011 13:45 Uhr Seite 7