![background image](http://html2.mh-extra.com/html/parkside/pdss-310-a1/pdss-310-a1_original-operating-instructions_3855155010.webp)
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the equipment is used in commercial,
trade or industrial businesses or for equivalent
purposes. Only allow repairs and services to be
carried out by authorized professional repair
shops.
Remember.
Too small a diameter of the hose and too
long a hose line will result in loss of power.
6. Technical data
Max. loosening torque
310 Nm
Working range (max. thread size)
M14
Max. permitted operating pressure
6.3 bar
Idling speed
7,000 min
-1
Square drive mount
12.7 mm (1/2 inch)
Air consumption at 4.0/6.3 bar
210/310 l/min
Recommended hose diameter
Ø 10 mm
Recommended hose length
10 m
Weight
2.2 kg
Sound and vibration
Sound and vibration values were measured in
accordance with ISO 15744 and ISO 28927-2.
L
pA
sound pressure level
84.4 dB(A)
K
pA
uncertainty
3 dB
L
WA
sound power level
95.4 dB(A)
K
WA
uncertainty
3 dB
Wear ear-muffs.
The impact of noise can cause damage to
hearing.
Vibrations
Vibration emission value a
h
= 3.3 m/s
2
K uncertainty = 0.82 m/s
2
Additional information
Warning!
The specified vibration value was established in
accordance with a standardized testing
method. It may change according to how the
equipment is used and may exceed the
specified value in exceptional circumstances.
The specified vibration value can be used to
compare the equipment with another tool.
The specified vibration value can be used for
initial assessment of a harmful effect.
Reduce noise generation and vibration to a
minimum!
■
Use only equipment that is in perfect
condition.
■
Maintain and clean the equipment regularly.
■
Adopt your way of working to the
equipment.
■
Do not overload the equipment.
■
Have the equipment checked if necessary.
■
Switch off the equipment when not in use.
■
Wear gloves.
Residual risks
Even if you use the equipment in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment’s construction and
layout:
1. Damage to hearing if no suitable ear
protection is used.
2. Health damage caused by hand-arm
vibrations if the equipment is used over a
longer period or is not properly guided and
maintained.
Air supply:
Via a compressed air source with pressure
setting function, e.g. a compressor. Before
starting up, please also read section 8 “Care
and maintenance”.
10
GB/
IE
Anleitung_LB3_4138942:_ 12.04.2011 13:45 Uhr Seite 10