Parkside PDSS 16 A1, Translation Of The Original Instructions, Page: 13 / 192

PDSS 16 A1
■ 10 │
GB│CY
Hazards caused by repetitive movements
■ Users of the compressed air tool may experience unpleasant
sensations in their hands, arms, shoulders, neck area or other
body parts .
■ Assume a comfortable position when working with the
compressed air tool, pay attention to safe footing and avoid
unfavourable positions or such that make it difficult to keep your
balance . During work over longer periods, the operator should
change posture to avoid discomfort and fatigue .
■ If the operator notices symptoms such as persistent discomfort,
throbbing, pain, tingling, burning or stiffness, these warning
indications should not be ignored . The operator should consult a
qualified medical doctor .
Hazards caused by accessories
■ Separate the compressed air tool from the compressed air supply
before replacing the attachment or accessory .
■ Only use accessories that are intended for this appliance and
comply with the requirements and specifications listed in these
operating instructions .
■ Avoid direct contact with the accessory tool during and after use
because it may be hot or have sharp edges .
■ The permissible speed of the accessory tool used must be at least
as high as the maximum speed specified for the compressed air
tool . Accessories that rotate faster than the permissible rate can
break and throw pieces into the air .
■ Never fit a grinding disc, cutting disc or milling cutter . A bursting
grinding disc can lead to serious injuries or death .
■ Do not use discs that are damaged, cracked or have been
dropped .