background image

GB/IE/CY

Introduction / Safety  advice

Volume flow: 

typically 130 - 160 ml / min

Nozzle size: 

Ø 1.4 mm

Gravity flow cup: 

500 ml

Sound pressure level:  64 dB(A)
Sound power level:   76 dB(A)
Values determined in accordance with EN 14462 
(EN1953/A1:2009). 

Safety advice

WARNING!

 

Read all the safety advice 

and instructions.

 

Failure to observe the safety 

advice and instructions could result in serious injury 
and / or damage to property.

Keep all the safety advice and instructions 
in a safe place for future reference! 

WARNING!

 

RISK OF RECOIL FORCES!

 

 High working pressures can give rise to recoil 
forces that under certain conditions can result 
in danger from continuous loading.

WARNING!

 

DANGER OF SUFFOCA-

 

 TION! Working with nitrogen presents 
a danger of suffocation!

 

Work in well 

ventilated spaces only.

WARNING!

 

DANGER OF INJURY! 

 

 

Never exceed the maximum allowable working 
air pressure of 3 bar. Use a pressure reducer 
to set the working air pressure.

  

   

DANGER OF INJURY! 
IMPROPER USE! 

Never point the 

device at people or animals.

  

   

DANGER  OF / EXPLOSION 
AND FIRE SMOKING PROHI-
BITED!

 Do not ignite any sparks or 

 open 

flames.

WARNING!

 

DANGER OF INJURY! 

 

 

Never use oxygen or other combustible gas as 
the energy source.

WARNING!

 

DANGER OF INJURY!

 

 

First disconnect the hose from the 
compressed air source and only then 
disconnect the compressed air supply  
 

hose from the device.

 

This will ensure that 

the compressed air supply hose does not wave 
around or recoil in an uncontrolled manner.

  

 

 For your own safety, wear 
suitable personal protective 

  

equipment. 

Wear respiratory protection with 

active charcoal filters and goggles.

  

   

Keep children and other people 
away while you are operating 
the device.

 

Distractions can cause 

 

you to lose control of the device.

  

Disconnect the device from the compressed air 
source before carrying out any repair or main-
tenance work, during interruptions to operations 
and before transporting the device.

  

When removing the hose coupling, hold the 
hose tightly in your hand to avoid injury 
caused by the hose shooting backwards.

  

Look out for damage on the device.

 

Check the device for damage before bringing 
it into use. Do not use the device if you discover 
any defects.

  

Do not kink the device’s hose, otherwise you 
may damage it.

  

   Please note the safety instructions 

of the manufacturer of the sprayed 
material.

  

Remain alert at all times, pay attention 
to what you are doing and use common 
sense in your work. Do not use any 
device when you are tired or under the 
influence of drugs, alcohol or medica-
tions. 

  

Do not remove rating plates or labels - they 
are safety-relevant parts of the device.

  

If you are inexperienced in the use of this type 
of device, you should seek out information or 
training to learn how to handle it safely.

  

Original accessories / 
attachments

  

Use only the accessories and attach-
ments detailed in the operating in-
structions.

 The use of accessories other than 

those recommended in the operating instructions 
could lead to you being in danger of injury. 

Summary of Contents for PDFP 500 A1 - 3





































Reviews: