Parkside PDBS 1800 A1, Original Instructions Manual

Page: 16 / 36

PDBS 1800 A1
GB
│
IE
│
NI
│ 13 ■
Troubleshooting
Fault Possible
cause Remedy
Speed too
slow, air
escapes from
the outlet . Motor parts
jamming due
to dirt . Check the
pressure
supply filter
for contamina-
tion .
Pressure
supply too
low . Check the
pressure sup-
ply filter for
contamination .
Lubricate the
tool as de-
scribed in the
instructions .
If necessary,
repeat the
steps outlined
above .
Tool does
not move;
compressed
air escapes
completely
through the
outlet . Motor is
jammed due
to material
build-up . Lubricate the
tool as de-
scribed in the
instructions .
Disposal
The packaging consists of environmentally
friendly material . It can be disposed of in
local recycling containers .
Do not dispose of the tool in the normal
domestic waste!
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out tool .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product .
Dispose of lubricants and cleaning agents in an
environmentally friendly manner . Observe the legal
regulations .
■ Dispose of lubricant residues at a disposal
point . Do not allow lubricants to enter drains or
watercourses . Do not allow them to get into the
subsoil/soil . Make sure you use a suitable mat/
surface . Dispose of lubricants in accordance
with official regulations .
■ Dispose of contaminated maintenance material
and consumables at a collection point provided
for this purpose .