PDBS 1800 A1
GB
│
IE
│
NI
│
9
■
■
The exhaust air should be extracted so that the
minimum amount of dust is raised in an already
dusty environment .
■
If dusts or vapours are created, the main priority
must be to control these at the site of their
release .
■
All machine components or accessories intended
for collecting, extracting or suppressing airborne
dust or vapours or should be used and serviced
properly in accordance with the manufacturer’s
instructions .
■
Consumables/machine tools should be selected,
maintained and replaced in accordance with
the recommendations in this guide in order to
avoid unnecessary intensification of dust or
vapour production .
■
Use a dust mask as per the instructions provided
by your employer or as required by health and
safety regulations .
■
Working with certain materials can lead to
emissions of dust and vapours that are poten-
tially explosive .
Hazards caused by noise
■
Excessive noise levels in conjunction with insuffi-
cient hearing protection may lead to permanent
hearing damage, loss of hearing and other
problems, such as tinnitus (ringing, buzzing,
whistling or humming in your ears) . It is essential
to carry out a risk assessment with regard to
these hazards and implement suitable control
mechanisms .
■
Suitable control mechanisms include measures
such as the use of insulating materials to avoid
ringing noises from occurring on the workpieces .
■
Use hearing protection according to the
instructions provided by your employer and as
required by work and health safety regulations .
■
The automatic screwdriver is to be operated
and maintained in accordance with the recom-
mendations contained in this manual in order to
reduce any unnecessary increase of the noise
levels .
■
If the automatic screwdriver is equipped with
a sound absorber, it must always be available
and in good working order when using the
automatic screwdriver .
■
Consumables and the machine tool should
be selected, maintained and replaced in
accordance with the recommendations in these
instructions in order to avoid any unnecessary
increase of the noise levels .
■
The compressed-air tool is to be operated and
maintained in accordance with the recommen-
dations contained in these instructions in order
to reduce any unnecessary increase of the noise
levels .
■
The integrated sound absorber may not be
removed and must be in good working order .
Hazards caused by vibrations
■
Vibrations can damage the nerves and cause
malfunctions to the blood circulation in the
hands and arms .
■
Keep your hands away from the fittings of the
nut wrenches .
■
Wear warm clothing when working in a cold
environment and keep your hands warm and
dry .
■
If you notice that the skin of your fingers or
hands is becoming numb, tingles, hurts or shows
white discolouration, stop working with the
machine and consult a doctor .
■
The automatic screwdriver must to be operated
and maintained in accordance with the recom-
mendations contained in this manual to reduce
any unnecessary increase of the vibrations .
■
Do not use any worn-out or poorly matching
fittings and extensions, as there is a high proba-
bility that this will lead to a significant increase
in the vibrations .
■
Consumables and the machine tool should be
selected, maintained and replaced in accord-
ance with the recommendations in this guide
in order to avoid unnecessary increase of
oscillations .
■
If possible, sleeve fittings should be used .
Summary of Contents for PDBS 1800 A1
Page 3: ......
