![background image](http://html1.mh-extra.com/html/parkside/pbsg-95-d5/pbsg-95-d5_operation-and-safety-notes_4079798018.webp)
18 GB/IE
7. Use the right tool
Do not force small tools to do the job of
a heavy duty tool.
Do not use tools for purposes not in-
tended; for example do not use circular
saws to cut tree limbs or logs.
8. Dress properly
Do not wear loose clothing or jewel-
lery, they can be caught in moving
parts.
Non-skid footwear is recommended
when working outdoors.
Wear protective hair covering to con-
tain long hair.
9. Use protective equipment
Use safety glasses.
Use face or dust mask if working opera-
tions create dust.
10. Connect dust extraction equip-
ment
If the tool is provided for the connection
of dust extraction and collecting equip-
ment, ensure these are connected and
properly used.
11. Do not abuse the cord
Never yank the cord to disconnect it
from the socket. Keep the cord away
from heat, oil and sharp edges.
12. Secure work
Where possible use clamps or a vice to
hold the work. It is safer than using your
hand.
13. Do not overreach
Keep proper footing and balance at all
times.
14. Maintain tools with care
Keep cutting tools sharp and clean for
better and safer performance.
Follow instruction for lubricating and
changing accessories.
Inspect tool cords periodically and if
damaged have them repaired by an
authorized service facility.
Inspect extension cords periodically
and replace if damaged.
Keep handles dry, clean and free from
oil and grease.
15. Disconnect tools
When not in use, before servicing and
when changing accessories such as
blades, bits and cutters, disconnect
tools from the power supply.
16. Remove adjusting keys and
wrenches
Form the habit of checking to see that
keys and adjusting wrenches are removed
from the tool before turning it on.
17. Avoid unintentional starting
Ensure switch is in “off” position when
plugging in.
18. Use outdoor extension leads
When the tool is used outdoors, use
only extension cords intended for out-
door use and so marked.
19. Stay alert
Watch what you are doing, use common
sense and do not operate the tool
when you are tired.
20. Check damaged parts
Before further use of tool, it should be
carefully checked to determine that it
will operate properly and perform its in-
tended function.
Check for alignment of moving parts,
binding of moving parts, breakage of
parts, mounting and any other conditions
that may affect its operation.
A guard or other part that is damaged
should be properly repaired or replaced
by an authorized service centre unless
Summary of Contents for PBSG 95 D5
