![background image](http://html1.mh-extra.com/html/parkside/pat-20-li-a-1/pat-20-li-a-1_translation-of-the-original-instructions_3839104034.webp)
PAT 20-Li A1
■
30
│
GB
│
MT
■
Never use this tacker for fastening electri-
cal cables.
It is not suitable for the installation
of electrical lines, can damage the insulation
of electrical cables and thus cause electrical
shocks and increase the risk of fire .
Safety guidelines for battery chargers
■
This appliance may be used by chil-
dren aged 8 years and above and
by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks . Do not allow
children to use the appliance as a
toy . Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised .
The charger is suitable for
indoor use only .
WARNING!
■
If the connecting cable needs to
be replaced, this must be carried
out by the manufacturer or an
authorised representative in order
to avoid safety hazards .
Original accessories/auxiliary
equipment
■
Only use the accessories and additional
equipment that are specified in the oper-
ating instructions and compatible with the
appliance.
Before use
Charging the battery pack (see fig . A)
CAUTION!
►
Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger .
NOTE
►
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C .
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level
is between 50% and 80% . The storage
climate should be cool and dry and the
ambient temperature should be between 0°C
and 50°C .
♦
Connect the battery pack to the high-speed
battery charger (see fig . A) .
♦
Insert the power plug into the socket .
The control LED lights up red .
♦
The green LED indicates that the charging
process is complete and the battery pack
is ready .
ATTENTION!
♦
If the red control LED flashes, this means
that the battery pack has overheated and
cannot be charged .
♦
If the red and green control LEDs both
flash, this means that the battery pack is
defective .
♦
Push the battery pack into the appliance .
♦
Switch off the charger for at least 15 minutes
between successive charging sessions .
Also disconnect the power plug from the mains
power socket .
Summary of Contents for PAT 20-LI A 1
Page 3: ...10 20 30 40 50 A B C...