Parkside PARKSIDE PPHSS 715, Operation And Safety Notes

Page: 4 / 10

Introduction
Precision pendulum-action jigsaw
PPHSS 715
L
Introduction
L
For your safety
Before using the tool for the first time,
familiarise yourself with its functions
and with proper handling of power
tools. Please read the following operating instructions
for this purpose. The general safety notes in the
enclosed booklet must also be strictly observed.
Use the tool only as described and for the stated
areas of application. Keep this instruction manual
in a safe place. If you give the tool to anyone else,
please make sure to also pass on all documents
along with it.
L
Proper use
This tool is suitable for making straight and curved
cuts and mitre cuts on squared workpieces made of
plastic, wood and metal. The tool is approved solely
for private use in dry areas. Please observe the notes
relating to the types of saw blade. Any other use or
modification of the tool constitutes improper use and
poses a serious risk of accident. The manufacturer
is not liable for damage caused by improper use of
the tool.
L
Equipment
Q
Handle
W
On-off switch (lockable)
E
Housing
R
Speed selector thumbwheel
T
Mains cable
Y
Ventilation grid
U
Extractor connecting piece
I
Extractor channel
O
Light alloy sole plate
P
Guide shoe (removable)
{
Locking screw
}
Pendulum action switch
q
Roller guide
w
Saw blade
e
Insert openings (including fixing screw)
r
Splinter guard
t
Touch guard
y
Quick-action chuck
u
Parallel guide
i
Allen key
o
Retention pin (see Fig. B)
L
Delivery scope
1 PPHSS 71 jigsaw
1 extractor connecting piece
1 parallel guide
1 splinter guard (already fitted)
2 saw blades (for soft wood, for soft wood
and hardwood)
1 saw blade for metalworking
1 Allen key
1 plastic carrying case
1 instruction manual
1 “General Safety Notes” booklet
1 “Warranty and Service” booklet
L
Technical data
Jigsaw: Parkside PPHSS 715
Rated voltage: 230 V ~ 0 Hz
Power input: 71 W
Stroke rate, idling: max. n
0
2800 rpm
Pendulum stroke: 3 stages and fine
cutting adjustment
Bevel cuts: 0 - 4° left / right
Saw blade:
Holder: quick-action chuck
Cutting depth: min. 110 mm
Noise / vibration information
Sound pressure level*: 84 dB (A) ± 3 dB
Noise level*:
≥
8 dB (A)
Hand arm vibration*: < 2. m / s
2
* Values measured in accordance with EN 60 74
6 GB/IE