24 GB/IE
Removing / Charging /
Attaching the battery pack
CAUTION!
Always unplug from the mains
before removing or inserting the battery pack
6
from/in the charger.
Note:
The battery pack comes partly charge.
Charge the battery pack in the charger before use,
ideally for a minimum of 1 hour.
This will ensure the battery pack delivers full power.
The Li-ion battery pack may be charged at any
time without reducing the life.
Interrupting the charging process does not damage
the battery pack.
Never charge the battery pack
6
in ambient
temperatures below 10 °C or above 40 °C.
Removing and charging the
battery pack
1 To remove the battery pack
6
, press the
release button
4
and pull out the battery
pack
6
.
2. Insert the battery pack
6
in the rapid
charger
12
.
3. Connect the mains plug to the socket. The LED
charging indicator
14
will light up red. If no
battery pack is connected to the charger and
the charger is connected to the mains, the
LED
13
will light up green.
4. The green LED charging indicator
13
means
charging is completed and the battery pack
6
is ready for use.
5. Attach the battery pack
6
to the product.
Green LED lights up
without battery pack
Rapid Charger ready
Green LED lights up
with battery pack
Battery pack fully
charged
Red LED lights up with
battery pack
Battery pack charging
Red LED flashes with
battery pack
Battery pack defect
Green LED flashes with
battery pack
Battery pack too cold
or warm
Checking the battery level
Press the battery level button
3
to check the
battery charge.
The battery indicator
5
will show the battery
level.
3 RED LEDs light up = maximum charge
2 RED LEDs light up = medium charge
1 RED LED lights up = low charge
Dust / Shavings extraction
Never work on materials containing asbestos.
Asbestos is considered carcinogenic.
FIRE HAZARD!
Using power tools with a dust extraction system
which can be connected to a vacuum cleaner
poses a fire hazard! Unfavourable conditions,
e.g. sparking, grinding metal or metal pieces in
wood, wood dust inside the vacuum bag can
ignite. This can particularly occur if the wood
dust is mixed with paint particles or other
chemicals and the ground product is hot after
long work periods. Therefore avoid the
grinding material and the tool overheating.
Always empty the vacuum bag in the vacuum
cleaner before taking breaks.
Always use a dust extraction system.
Ensure the work area is well ventilated.
Observe your country’s applicable rules for the
materials you are working on.
Connecting the dust extraction
system
Attach the dust extraction system to the tool.
Secure by attaching the housing attachment.
Slide the dust extraction element
8
onto the
tool. Fix by attaching the connecting ring
10
.
