Parkside PAMFW 12 E4, User Manual

Page: 26 / 72

24 GB
Removing sanding paper: Peel the
sanding paper
[ 21]
from the rim of the
sanding pad
[ 20]
and remove it.
Apply even pressure to extend the life of the
sanding sheets.
˜
Cleaning and maintenance
m WARNING!
Always switch the product off, remove
the battery pack
[ 2]
and let the
product cool down before performing
inspection, maintenance and cleaning
work!
˜
Cleaning
Never allow fluids to get into the product.
The product must always be kept clean, dry
and free from oil or grease. Remove debris
from it after each use and before storage.
Regular and proper cleaning will help ensure
safe use and prolong the life of the product.
Clean the product with a dry cloth. Use a
soft brush for areas that are hard to reach.
In particular clean the air vents after every
use with a cloth and soft brush.
The vents must always be clear.
NOTE
u
Do not use chemical, alkaline, abrasive
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces.
˜
Maintenance
The product is maintenance-free.
Before and after each use, check the product
and accessories (e.g. accessory tools) for
wear and damage. If required, exchange
them for new ones as described in this user
manual. Observe the technical requirements
(see “Technical data”).
Check covers and safety devices for
damages and correct installation. Replace as
necessary.
˜
Repair
This product does not contain any parts
that can be repaired by the user. Contact
an authorised service centre or a similarly
qualified person to have it checked and
repaired.
˜
Storage
Switch the product off.
Clean the product as described above.
Store the product and its accessories in a
dark, dry, frost-free, well-ventilated place.
Always store the product in a place that is
inaccessible to children. The ideal long term
storage (longer than 3 months) temperature
is b10 and +30 °C and relative
humidity not above 60%.
Store the product in its carrying case
[ 15]
.
Battery pack advice
Only store the battery pack
[ 2]
partially
charged. The battery pack should be
charged to 30 to 70 % (red and orange LED
in the charge indicator
[ 8]
light up) before
storing for extended periods.
Check the battery pack
[ 2]
charge about
every 3 months when storing for extended
periods. Recharge as necessary.