PAH 1700 A1
GB
│
IE
│
NI
│
7
■
Switching on and off
During operation, you can choose between instan-
taneous and continuous operation .
Switching to instantaneous operation:
♦
Press the ON/OFF switch .
Switching off instantaneous operation:
♦
Release the ON/OFF switch .
Switching to continuous operation:
♦
Press the ON/OFF switch and lock it in this
position with the locking switch .
Switching off continuous operation:
♦
Press the ON/OFF switch and release it
again .
Maintenance and cleaning
WArNiNg! riSk of iNjury! Switch
off the appliance and pull out the
power plug before starting any work
on the appliance.
■
The handles, ventilation slots and the motor
housing must always be kept clean, dry and
free from oil or grease .
■
Use a soft, dry cloth to clean the housing .
■
Make sure that the ventilation slits are not
obstructed .
■
Clean the tool holder regularly:
♦
Before fitting a tool into the tool holder ,
grease it lightly .
WarnInG!
►
If the cord of the power tool is damaged, it
must be replaced with a specially designed
cord that can be purchased through our
Customer Service .
NOTE
►
Replacement parts not listed (such as switch-
es) can be ordered via our service hotline .
Topping up the oil
NOTE
►
Before operating the appliance, check
whether there is enough oil in the appliance
(see section "Checking the oil level") .
Operation without sufficient oil will cause
irreparable damage to the appliance .
If you have ascertained that there is no oil in the oil
inspection window , you need top up the oil:
♦
Lay the appliance on a flat surface with the oil
inspection window facing upwards .
♦
Use the supplied assembly wrench to
remove the oil inspection window from the
housing .
♦
Pour the oil with help from the oil bottle into
the opening until it is 1 cm below the lip .
♦
Replace the oil inspection window and
screw it tight using the assembly wrench .
Check the fill level as described in the section
“Checking the oil level” .
replacing the carbon brushes
NOTE
►
Have the carbon brushes replaced by the
manufacturer, Customer Service or a similarly
qualified person .
Disposal
The packaging is made of environmentally
friendly material and can be disposed of
at your local recycling centres .
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner .
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance .
IB_285765_PAH1700A1_LB6-.indb 7
03.05.17 15:29
