background image

11 

GB/IE

Commissioning / Maintenance and cleaning / Disposal / Information

On a belt sander (e.g. Parkside PEBS 600 
see Fig. G):

j   

Appropriately fasten the belt sander into / onto 
a suitable stationary facility.

j   

Pay attention to the running direction of the belt 
on the belt sander when resharpening.

Q     

Maintenance and cleaning

WarNING!

 Before you clean or maintain 

the device always pull the mains lead out of the 
mains socket.

j   

Always keep the device clean, dry and free of 
oil or grease.

j   

Regularly clean the tool receptor 

3

.

j   

Clean the attachment tools of all remains of 
adhesives and other grime.

j   

Liquids may not be permitted to permeate into 
the appliance. 

j   

Use a soft, fluff-free cloth to clean the housing. 

j   

Never use fuel, solvents or aggressive cleansers 
that could damage plastic.

Q     

Disposal

   The packaging is wholly composed of 

environmentally-friendly materials that can 
be disposed of at a local recycling centre.

   

Do not dispose of electrical power 
tools with the household rubbish!

In accordance with European Directive 2002 / 96 / EC 
(covering waste electrical and electronic equipment) 
and its transposition into national legislation, worn 
out electrical power tools must be collected separately 
and taken for environmentally compatible recycling.

Contact your local refuse disposal authority for 
more details of how to dispose of your worn out 
electrical devices.

Q

     

Information

Q

     

Service centre

J    

WarNING!

 

Have your device re-

paired only by qualified specialist 
personnel using original manufacturer 
parts only.

 This will ensure that your device 

remains safe to use.

J    

WarNING!

 

If the plug or mains 

lead needs to be replaced, always have 
the replacement carried out by the 
manufacturer or its service centre.

 This 

will ensure that your device remains safe to use.

Q     

Warranty

This appliance is guaranteed for 3 years 
from the date of purchase. It has been care-
fully produced and meti-culously checked 
before delivery. Please keep your receipt 
as proof of purchase. Contact your service 
centre by telephone in case of questions 
pertaining to the warranty. your goods 
can be transmitted free of cost only in this 
manner. This warranty applies only to the 
initial purchaser and is non-transferable.

The warranty covers only material or manufactur-
ing faults, not normal wear or damage to fragile 
parts such as switches or rechargeable batteries.  
The appliance is intended solely for private, not 
commercial, use. 

If this product has been subjected to improper or in-
appropriate handling, abuse, or interventions not 
carried out by one of our authorised sales and 
service outlets, the warranty will be considered void. 
This warranty does not affect your statutory rights.

30164_Elektroschaber_Content_LB3 (GB/DK/DE).indd   11

16.04.09   12:34

Summary of Contents for KH 3163 POWER SCRAPER





























Reviews: