background image

32  GB

Tighten the clamping screw 

7

 using the Allen 

key 

10

.

   

Check that the tool is firmly seated.  

Incorrectly or insecurely attached tools could 
become lose during use and injure you.

  

Operation

Q   

Switching  On / Off

   

Slide the ON / OFF switch 

1

 forwards to switch 

on the device.

   

Slide the ON / OFF switch 

1

 backwards to 

switch off the device.

Q   

Selecting the oscillation speed

   

Preselect the required oscillation speed using 
the oscillation speed setting wheel 

3

NOTE:

 The required oscillation speed depends on 

the material and the working conditions and can be 
determined by means of a practical test.

Q   

Maintenance and cleaning

 

DANGER OF INJURY!

 

Always remove the battery from the unit 
before working on the power tool.

   

Do not use sharp objects for cleaning the device. 
Do not allow any liquids to enter the device. 
Otherwise the device could be damaged. 

   

Clean the device frequently; for best results, do 
this immediately after you have finished using it.

   

Use a dry cloth to clean the housing – under 
no circumstances use petrol, solvents or clean-
ing agents that attack plastic. 

   

A vacuum cleaner is required to thoroughly clean 
the device.

   

Ventilation openings must always be kept free.

   

Remove any adhering dust with a narrow paint 
brush.

Note: 

Spare parts not listed (e.g. carbon brushes, 

switches) can be ordered through our call centre.

Q   

Warranty

The warranty for this appliance is for 3 
years from the date of purchase. The ap-
pliance has been manufactured with care 
and meticulously examined before deliv-
ery. Please retain your receipt as proof 
of purchase. In the event of a warranty 
claim, please make contact by telephone 
with our Service Department. Only in this 
way can a post-free despatch for your 
goods be assured.

The warranty covers only claims for material and 
maufacturing defects, but not for transport damage, 
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.

The warranty is void in the case of abusive and im-
proper handling, use of force and internal tampering 
not carried out by our authorized service branch. Your 
statutory rights are not restricted in any way by this 
warranty.

The warranty period will not be extended by repairs 
made unter warranty. This applies also to replaced 
and repaired parts. Any damage and defects extant 
on purchase must be reported immediately after 
unpacking the appliance, at the latest, two days after 
the purchase date. Repairs made after the expiration 
of the warranty period are subject to payment.

GB
Service Great Britain
Tel.:  

 0871 5000 720  
(0,10 GBP/Min.)

e-mail:   [email protected]

IAN 96269

   Disposal

 The packaging is made of environmen-
tally friendly materials, which may be 
disposed of through your local recycling 
facilities.

Disposal / Translation of the original declaration of conformity / Manufacturer

Start-up / Operation / Maintenance  and  cleaning / Warranty / Disposal

Summary of Contents for IAN 96269



































Reviews: