background image

GB/IE/CY

Safety  … / Start-up / Operation / Maintenance  and  Cleaning / Warranty

General power tool safety warnings / Safety instructions for tackers

ble installation and may damage the insulation  
of electric cables thereby causing electric shock 
or fire hazards.

   Supplementary  instructions

  

PROTECT yOUR EyES!

 Wear protective 

glasses. This also applies to people who are 
assisting by supporting or holding in place.

  

Secure the work-piece firmly. Use clamps or a 
vice to firmly hold the work-piece. This results in 
a safer grip than with your hand.

  

Always ensure that the cable is behind the device.

  

Original  accessories / tools

  

Use only the accessories and attachments de-
tailed in the operating instructions, or those which 
are compatible with the device.

  

Start-up

  

Inserting the magazine

  

Turn the device.

   

Press the unlocking device 

3a

 together (see fig. A).

  

Pull the magazine 

3

 back (see fig. A).

  

Fill the magazine well 

4

 with staples or nails 

(see fig. B). 

NOTE: 

Nails can only be inserted left into the 

magazine well 

4

 - as shown.

  

Once full push the unlocking device 

3a

 until it 

hits the magazine 

3

 and until it engages. 

NOTE: 

You can tell if there are staples in the 

magazine by using the fill level indicator 

5

.

  

Operation

  

Switching on

  

Press the device on the place on the material 
where you want to staple / nail.

  

Undo the start lockout 

1

.

  

Press the trigger 

2

.

  

Troubleshooting

 

DANGER OF INJURy!

 

Switch the device off and pull the plug out of the 
mains socket before carrying out any work on the 
device.

Cause:

A staple or nail is blocking the device.

Solution:

  

Open the unlocking device 

3a

. Loosen the  

pretension.

  

Remove the staple or nail.

  

Maintenance and Cleaning

 

DANGER OF INJURy!

 

Switch the device off and pull the plug out of the 
mains socket before carrying out any work on the 
device.

  

Always keep the device clean, dry and free of 
oil or grease.

  

Use a dry cloth to clean the housing.

 If the connection cable needs to  

 

 be replaced, this repair must be performed by 
the manufacturer or a representative to prevent 
safety hazards.

   

Warranty

The warranty for this appliance is for 3 
years from the date of purchase. The ap-
pliance has been manufactured with care 
and meticulously examined before deliv-
ery. Please retain your receipt as proof 
of purchase. In the event of a warranty 
claim, please make contact by telephone 
with our Service Department. Only in this 
way can a post-free despatch for your 
goods be assured.

The warranty covers only claims for material and 
maufacturing defects, but not for transport damage, 
for wearing parts or for damage to fragile compo-

Summary of Contents for IAN 93450





























Reviews: