36
GB
IE
This type of battery may be charged with
the following chargers:
PLG 20 A3, PLG 20 A4, PLG 20 C1,
PDSLG 20 A1.
Charging
time (min.)
PLG 20 C1
PLG 20 A4
PLG 20 A3
PDSLG 20 A1
PAP 20 B1
60
30
PAP 20 B3
120
60
Noise and vibration values were determined
according to the standards and stipulations
mentioned in the declaration of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples of
measures to reduce vibration expo-
sure are the wearing of gloves when
using the tool and limiting the work-
ing hours. All parts of the operating
cycle are to be taken into account in
this (for example times in which the
electric tool is turned off and those in
which even though it is turned on, it
is not running under a load).
Notes on safety
This section deals with the basic safety
regulations while working with the chainsaw.
A chainsaw is a dangerous device,
which can cause serious or even
fatal injuries with incorrect or care-
less use. Thus, for your own safety
and the safety of others, you should
always take note of the instructions
on safety and, in case of diffi culties,
consult a specialist for advice.
Symbols used in the
instructions
Hazard symbols with informa-
tion on prevention of personal
injury and property damage.
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on preven-
tion of harm / damage.
Notice symbol with information on
how to handle the device properly.
Wear protective gloves in order to
avoid cutting yourself!
Symbols used on the saw
A chainsaw is a dangerous device,
which can cause serious or even
fatal injuries with incorrect or care-
less use. Thus, for your own safety
and the safety of others, you should
always take note of the instructions
on safety and, in case of diffi culties,
consult a specialist for advice.
Read and take note of the operating
manual belonging to the machine
Wear personal protective equip-
ment. Basically, wear protective
goggles or, even better, face protec-
tion, safety helmet, cut-protection
