Parkside 367512 2101, Operation And Safety Notes Translation Of The Original Instructions

Page: 6 / 137

6 GB/IE/NI/CY/MT
Car battery charger & jump
starter ULG 17 A1
z
Introduction
Congratulations!
You have purchased one
of our high-quality products.
Please familiarise yourself with the
product before setup or first use. Read
the following original operating and
safety instructions carefully. This product
must be set up or used only by people who
have been trained to do so.
z
Intended use
The Ultimate Speed ULG 17 A1 is a car
battery charger with pulse maintenance
charge (chip software), used for charging
and maintenance charging and suitable
for the following 6 V or 12 V-lead
rechargeable batteries (batteries)
with electrolyte solution, AGM batteries,
Table of pictograms used / Introduction
Table of pictograms used
Read the operating instructions
of this product attentively and
with care before use.
~50 Hz
Alternating voltage with
a frequency of 50 Hz
NOTE: This symbol indicates
additional information and
explanations on the product
and its use.
Caution! Possible risks!
Caution! Explosion hazard!
Caution! Risk of electric shock!
Protection class IP20:
Protection from the device
housing against touching live
or internal moving parts with
the fingers.
Dispose of the batteries in the
specified battery collection
points.
Suitable for lead-acid battery:
8 Ah – 250 Ah
Do not dispose of any
electrical devices in domestic
waste!
Only for use in closed,
ventilated rooms!
Dispose of packaging prop-
erly.
Do not dispose of the device in
household waste!
Packaging material –
corrugated paper
Suitable for cars
Suitable for motorbikes
Suitable for the charging
of 6-V batteries
Suitable for the charging
of 12-V batteries
Made from recycling material