Parkside 340067 1910, Operation And Safety Notes Translation Of The Original Instructions

Page: 30 / 105

29 GB/IE
¾
Clean the product with a dry cloth . Use a
soft brush for areas that are hard to reach .
¾
In particular clean the air vents after every
use with a cloth and soft brush .
¾
The air vents must always be clear .
¾
Clean the chisel holder 11 regularly . Pull
off the dust cap 10 . Lightly grease the chisel
holder .
NOTE
u
Do not use chemical, alkaline, abrasive
or other aggressive detergents or
disinfectants to clean this product as they
might be harmful to its surfaces .
˜
Maintenance
¾
Before and after each use, check the product
and accessories (e . g . accessory tools) for
wear and damage . If required, exchange
them for new ones as described in this
instruction manual . Observe the technical
requirements (see “Technical data”) .
¾
Greasing: Use the hex key 15 to loosen
the 4 screws to remove the grease cap 1 .
Check if the product requires greasing . Top
up with grease 14, if necessary (Fig . H) .
¾
The carbon brushes 16 must be replaced
by the customer service or by a qualified
person .
˜
Repair
This product does not contain any parts that can
be repaired by the user . Contact an authorised
service centre or a similarly qualified person to
have it checked and repaired .
m
WARNING! RISK OF INJURY!
u
If the power cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazard .
˜
Storage
¾
Switch off the product and disconnect it from
the mains . Let the product cool down .
¾
Clean the product as described above .
¾
Store the product and its accessories in a
dark, dry, frost-free, well-ventilated place .
¾
Always store the product in a place that is
inaccessible to children . The ideal long term
storage (longer than 3 months) temperature
is b20 and +26 °C .
¾
Store the product in its carrying case 17 .
˜
Transportation
¾
Switch off the product and disconnect it from
the mains . Let the product cool down .
¾
Transport the product in its carrying case 17 .
¾
Protect the product from any heavy impact
or strong vibrations which may occur during
transportation in vehicles .
¾
Secure the product to prevent it from slipping
or falling over .