Parkside 332967_1907, Operation And Safety Notes

Page: 84 / 118

83 GB/MT
Push welding Drag welding
Burn smaller larger
Weld seam width larger smaller
Weld bead flatter higher
Weld seam fault larger smaller
z
Maintenance and cleaning
Note:
The welding device must be
regularly serviced and overhauled for
proper function and for compliance
with the safety requirements. Improper
and wrong operation may cause fail-
ures and damage to the device. Repairs
must only be carried out by qualified
electricians.
„
Switch off the main power supply
and the main switch of the device
off prior to performing any mainte-
nance work on the welding device.
„
Clean the welding device and
accessories regularly using air,
cotton waste or a brush.
„
In case of a defect or a necessary
replacement of equipment parts,
please contact the appropriate
qualified personnel.
z
Information about
recycling and disposal
Don’t throw away –
recycle!
Please return this device,
accessories and packaging to
your local recycling depot.
Do not dispose of the welding
device in household waste, in
fire or in water. Devices that are
no longer functional should be recycled
wherever possible. Ask your local
stockist for advice. To do this, please
see 2012/19/EU.
z
EC Declaration of
Conformity
We,
C. M. C. GmbH
Responsible for documentation:
Dr Christian Weyler
Katharina-Loth-Str. 15
66386 St. Ingbert
GERMANY
hereby take sole responsibility for
... / Maintenance and cleaning / Information about recycling ... / EC Declaration ...